Poor maintenance can often do more damage to an outboard motor than high usage can. So during the winter and off-season, it is important that the maintenance of your outboard isn’t neglected. As well as ensuring that your outboard is kept up to date with servicing, it is vital to ensure that it is also properly winterised. Failure to properly winterise an outboard motor can result in serious and possibly even terminal damage to it.
Whilst some people may try and undertake the winterising process themselves, unless you are highly skilled and knowledgeable in the area, we would always recommend that you use an approved outboard service centre, such as MB Marine, to carry out the work for you. This is especially important if your outboard motor is still under warranty, as failure to properly maintain and service your outboard as per the manufacturer’s guidelines, can invalidate your warranty.
WHAT IS OUTBOARD WINTERISING?
Winterising is the process of getting an outboard motor ready to be put away in storage for the winter. The winterising process covers a number of key procedures, that if not carried out before being put into storage, can cause the motor to corrode, seize and ultimately land you with a large repair bill.
WHAT IS INCLUDED?
Flushing the Engine - Saltwater can be highly corrosive to metal, so to avoid internal corrosion of the engine’s aluminium waterways, it is vital that outboards are properly flushed with clean water before they are put into storage.
Treating the Fuel - Fuel does not store well in engines and can lead to corrosion, so it shouldn’t be left untreated in the tank over winter. Part of the winterising process is to add a stabilizer to the fuel.
Inhibiting the Engine - In order to protect the inside of the engine whilst it is in storage, it is important to add a coating of fogging oil to bores. This will coat the inside of the engine in a protective film, protecting parts such as the big ends, cylinders and valves.
Applying Corrosion Guard to Engine - Corrosion Guard spray is applied to the engine’s metal and painted surfaces, to help prevent rust and corrosion from forming. It will also be applied to any existing patches of rust or corrosion to prevent them from worsening.
Draining the Engine Cooling System - To avoid the risk of damage being caused by water freezing and expanding in the motor whilst it is in storage during cold weather, it is thoroughly drained of water.
Checking and Replacing the Spark Plugs - Spark plugs are checked both for their condition and the electrode gap and are replaced if necessary.
Checking and Replacing the Engine Oil - Engine oil deteriorates over time as it absorbs moisture and gets contaminated, so checking the oil is part of the winterising process.
Checking and Replacing the Gear Oil - As with engine oil, gear oil can also deteriorate in quality, so this will also be checked and replaced at the same time. We always use proprietary outboard oils to ensure they contain the correct additives for use in water.
Greasing Moving Parts - It is vital to apply water-resistant grease to all moving parts of the outboard before placing it in storage. This includes the propeller shaft, joints, cable ends, nuts and bolts and other grease points prone to seizing.